ZK30 Paintless Removing Dent Car Body

paintless removing dent car body repair dent puller dents remover auto body suction cup repair tools for Vehicle Car Auto

Information of the Type B

Note!!!
1. The suitable temperature of the rubber strip is 0-4 ℃. Below 0 ℃, the hot melt will quickly solidify and cannot stick. At this time, you can use a hair dryer to heat the adhesive to make it firm.
2. If the original car paint has been repaired or has been damaged, this product cannot be used. This product does not damage the original paint when used.

Q&A
(1) Q:My glue will fall off easily if I pull it?

A:Use alcohol, car pits, and suction cups to clean it. If the car surface is not sticky, apply hot water first. It may also be that the temperature of the glue gun is not enough. The temperature must be above 80 ° C.

(2)Q:Why can’t the pit absorb?

A:Choose a suction cup slightly smaller than the pit, spread it evenly on the chuck, hold it against the pit with your hand, and wait for 3-10 minutes.

Information of the Type A

Features:
1. Included 5 pcs different size glue tabs + 1 pc knockdown, easy to use, everyone can use it.
2. Handle have a polygon design better for car repair.
3. Paintless repairing car dent body, does not damage the original paint.
4. Different size of tabs, can repair different size of the dent.
5. Not only can repair all kinds of cars, but also can repair refrigerator,washing machine,motorcycle dent and so on.

Specifications:

Color: Black + White

Detailed Size: As the picture show

How to use:
1. Clean damage surface with a damp clean cloth.
2. Put the glue to gun and heat(also it need about 5-10min ).
3. Pull the trigger and apply the drawing gasket with extruded glue.
4. Immediately place pad in the center of the dent and hold until sticks.
5. Place stem of pad through hole pulling bridge and screw knob.
6. Tighten knob until pad pops off.
7. Clean the surface.

Note:

1. Suit for dent size within 14cm.

2. Not including Hot Melt Glue Gun&Hot Melt Glue Stick.