AUTOOL BT360 12V Auto Battery Tester

AUTOOL BT360 Car Battery Load Tester

dedicatedly developed to test 12V regular flooded, automotive lead-acid batteries, AGM flat plate, AGM spiral, GEL, EFB batteries and Gel battery, etc. It provides techs or DTYer with a quick, simple and cost-effective solution to know the battery’s charging status better , check the battery’s health and detect faults.

[Multi-Functions]：

Battery test Cranking test Charging test Additional functions include: Set language, voltmeter and screen brightness adjustment. AUTOOL BT-360 Battery Tester includes :Battery test, Cranking test, Charging test functions. Mainly targeted to analyze the battery healthy status. It directly detects whether the battery is good or bad, and present suggested solutions.

[Professional & Reliable]：

Test standards include most battery standards in the world, CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB, which covers from 100- 2400 CCA, 30-220 AH.

[Multi-language Support]：

10 Languages are available.Available in English, Spanish, German, French Russian, Polish, Chinese, Dutch, Russian and Japanese. Other languages can be customized. There are two versions: Version 1.languages with English,Spanish, German, French,Russian, Italian Version 2.languages with English, Polish, Chinese, Dutch , Japanese

[3-YEAR WARRANTY]：

For damage caused by non-human factors, we promise to resend parts for free within 3 years. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.

[Efficiency & Safety]：

Using advanced conductive technology, it can directly display the high accuracy results of vehicle info. Deigned with polarity reverse connection protection,reverse connection will not damage the tester or affect the vehicle and battery.

Three Functions Test Operation Steps of AUTOOL BT360 Car Battery Load Tester

Step 1. Connect the 12V battery, red clips to positive pole and black clips to negative pole. Step 2. Battery Test: Firstly select the type of battery to be tested, then the test criteria and the test range, and then you have the results within few seconds. Step 3. Cranking Test: After selecting the cranking test function, follow the prompts to start the engine. Test completed. Step 4. Charging Test: After entering the charging test function, follow the prompt to increase the speed to 2500 RPM for 5 seconds, then press OK. Test completed.

Technical Parameters

Cold Cranking Amps Measure Range: Measure Standard Measure Range CCA —- 100-1400 JIS —- 26A17–245H52 DIN —- 100-1200 IEC —- 100-1200 EN —- 100-1400 SAE —- 100-1400 GB —- 30-220Ah BCI —- 100-1400 MCA —- 100-1400 CA —- 100-1400 Working Environment Temp: -20°C-50°C System voltage: 12 Volts Input voltage range: 9V~15V Caution： When doing a battery test, please make sure the car is off .

Packing List:

1pc* AUTOOL BT360 Car Battery Load Tester 2pcs* Full copper core kelvin clip 1pc* Manual